ACME laser machines — authorised dealer in Romania

CNC fibre lasers for cutting TUBE

SCROLL TO EXPLORE

3,000+

ACME units installed worldwide

60+

countries & regions with installations

machine series in the range

45+

machine models in the catalogue

Segment 01

Small tube cutting

For round, square and rectangular tube, plus special profiles — Ø8–350 mm, tubes up to 12.5 m long

Best-selling ACME machine for tube cutting

The chuck is fully enclosed, so slag and dust cannot reach the mechanism. Spatter is cleared from inside the tube during cutting. The control cabinet, laser source and machine body come assembled as one unit, with no air-conditioned room needed for the source.

Capacity: Ø8–180 mm
Length: 6 m
Tube weight: ≤ 300 kg
Chuck: up to 200 rpm

D Series details View all machines

High-speed laser cutting machine for small tubes

Cuts round, square, rectangular or oval tube. On square and rectangular sections, the tube rotates at every cut, so the fast chuck shortens the cycle. The semi-automatic loader is optional and lets one person supervise multiple machines.

Capacity: Ø8–180 mm (3 models)
Length: 6 m
Chuck: up to 200 rpm
Control: EtherCAT

A Series details View all machines

High-efficiency laser machine for tubes and profiles

With the full-stroke chuck, the jaws do not need changing between diameters. Thanks to its square bore, the chuck also holds square and rectangular sections and special profiles. During unloading, the servo support follows the part down so that its surface is not scratched.

Diameter: Ø8–350 mm (4 models)
Length: up to 12.3 m
Laser power: 1–30 kW
Tube weight: up to 1.5 t

E Series details View all machines

Short-remnant 2-chuck machine in five models

The side-mounted bed, with its low centre of gravity, keeps every model in the range stable: tubes of Ø8–350 mm and up to 12.5 m, all with 45° bevel cutting. On the three larger models, the front chuck advances by up to 1,400 mm and keeps long parts from wobbling as they rotate.

Chuck: 200 rpm (2× standard)
Acceleration: up to 1.5 G
Remnant: from 35 mm
Laser power: 1–30 kW

TF Series details View all machines

Segment 02

Large tube & profile cutting

For H- and I-beams, channels and tube — up to Ø840 mm and parts up to 3 t

Laser machine for heavy profiles and large-diameter tubes

I-beams, H-beams, channels and angles go in whole and come out with holes cut, bevelled and cut to length, with no trip to the saw or grinder. In static cutting only the head moves, so the heavy part stays still. With 3 chucks, the last part is cut too, with no remnant.

Diameter: Ø30–840 mm (4 models)
Length: up to 12.5 m
Laser power: up to 40 kW
Bevel: ±45°

T Series details View all machines

Zero-remnant laser tube cutting machine

The middle one of the three movable chucks shifts to the right to release the last part cleanly from the tube. The standard laser head cuts ±45° bevels in V, Y, X or K. Servo motors drive positioning at up to 100 m/min and cut the idle time between parts.

Diameter: Ø10–350 mm (4 models)
Length: 6–12 m
Tube weight: ≤ 1,850 kg
Remnant: 0 mm

G Series details View all machines

Laser machine with 4 chucks for tubes and heavy profiles

The four chucks keep the part supported along its full length, so long profiles of up to 3 t do not sag during cutting. The standard bed is 12 m, with 9 or 15 m available to order. In static cutting only the head moves, which helps where holes are closely spaced.

Chucks: 4, clamping together
Bevel: ±45°
Capacity: Ø30–840 mm (3 models)
Laser power: 6–30 kW

TN Series details View all machines

Segment 03

Sheet cutting

For thin sheet and thick plate — cutting areas from 3×1.5 m to 24×3 m, thicknesses up to 100 mm

Economical laser sheet cutting machine

Designed for fabricators with small batches and varied work: the initial investment is low, as are maintenance and electricity costs. The same machine cuts light-gauge sheet and thick structural plate up to 100 mm, depending on material and laser source.

Cutting area: up to 12,000×2,500 mm (4 models)
Laser power: 1–60 kW
Speed / acceleration: 132 m/min · 1.5 G

S Series details View all machines

Table change in 15 seconds for sheet cutting

While one table is under the laser, parts are unloaded from the other and the next sheet is laid down, so there is no waiting for loading. Nine-stage piercing tackles thick plate without spatter or burrs at the start of the cut. Nozzles are changed automatically.

Table length: from 3,000 to 12,000 mm
Table width: from 1,500 to 3,000 mm
Sheet thickness: up to 100 mm
Table change: 15 s (+30% efficiency)
Max. positioning speed: 132 m/min

D Series details View all machines

Floor-rail gantry for thick plate

Takes the place of plasma and oxy-fuel cutting machines. The rail foundation is compatible with that of the oxy-fuel machine it replaces, so no new foundation is needed. It also cuts with compressed air instead of oxygen or nitrogen, for a lower cost per metre.

Laser power: 6–60 kW
Plate thickness: up to 100 mm
Format: 12–24 m (3 models)
Bevel: A / V / Y / X / K + special

LP Series details View all machines

Segment 04

Combined — sheet + tube/profiles

Sheet with tube, or sheet with heavy profiles, on one machine — saving space and budget for fabricators with a mixed workload

Compact 2-in-1 machine for sheet and tube

Being compact, it fits even into workshops where every square metre counts. Sheet and tube are handled from a single set of controls. The ACME chuck clamps with eight cylinders, with twice the force of a standard chuck, and has a square bore for tube and profiles.

Functions: Sheet + tube (2-in-1)
Sheet format: up to 6,000×2,500 mm
Tube: Ø8–250 mm
Laser power: 1–60 kW

ST Series details View all machines

2-in-1 machine for sheet and tube, fully enclosed

The table changes over in 15 seconds: while the machine cuts on one table, parts are unloaded from the other, hence the efficiency gain of more than 30%. The machine automatically fits the right nozzle for the sheet. Air pressure is measured and corrected on the fly.

Functions: Sheet + tube (2-in-1)
Sheet: up to 12,000×2,500 mm
Tube: Ø8–280 mm (3 models)
Laser power: 1–60 kW

DT Series details View all machines

Integrated cutting of heavy profiles and plate on a gantry machine

It can be configured with 1, 2 or 3 stations: while one cuts an H, I, U or L profile, the next is loaded and unloaded. The plate station handles up to 12,000×3,000 mm. In a single pass, the profile gets its holes, markings and bevels and is cut to length.

Laser power: 12–40 kW
Max. profile: 1,200×600 mm (12 m length)
Bevel: 5-axis · ±45° (V/Y/X/K)
Software: Tekla-compatible

LHM Series details View all machines

Segment 05

4-in-1 laser welding

Welding, cleaning, cutting and weld cleaning with one handheld unit — from 1,000 to 3,000 W

FLW-T Series — Four laser operations in a single handheld unit

Four laser operations in a single handheld unit

It is wheeled to parts that cannot be dismantled, on the shop floor or on site. It welds 3–10 times faster than TIG. An operator with no welding experience can start work within a few hours. The head changes in about a minute, according to the manufacturer.

Functions: 4-in-1 — welding, cutting, cleaning, weld cleaning
Laser power: 1,000–3,000 W
Mild steel welding: 0.5–10 mm
Weight: 150 kg / 250 kg (3 kW)

FLW-T Series details View in the range

Segment 06

Accessories

The parts that keep the machine in production — from nozzles and protective lenses to cutting heads and laser sources. Genuine parts, from our stock in Romania

Autofocus laser cutting head by BOCI

The sheet cutting head adjusts its focus automatically, detects piercing and repeats the pass if the material has not been pierced through. Before quoting, we confirm the fibre connector, the maximum power and the focal length that suits your sheet thicknesses.

Brand: BOCI
Use: Spare part · new machine

BOCI details All accessories

Fibre laser sources for cutting and welding machines

The source generates the beam and connects to the cutting or welding head, or to a galvanometer scanner. It is replaced on failure or when you want more power. Before ordering, we check the fibre connector, the maximum power the head can handle and the cooling.

Brands: MAX · Raycus
Use: Spare part · power upgrade

Laser sources details All accessories

Protective lenses for the cutting head

The protective lens is the first part in the path of spatter and takes the hit itself, so that the optics inside the head stay clean. It costs a few tens of euros, while the optics it protects cost thousands: putting off replacement shifts the risk to the expensive part.

Role: Protective lens, consumable
Delivery: In the size for your head

Lenses details All accessories

Genuine nozzles: the part at the tip of the cutting head

The beam passes through the nozzle orifice, which concentrates the cutting gas onto the cut. The orifice must be centred exactly on the beam axis: an off-centre or worn nozzle spoils the symmetry of the gas jet and the edge quality. We keep it in stock as a consumable.

Type: Single or double channel
Category: Wear part

Nozzles details All accessories

Ceramic rings: insulation between nozzle and head

The nozzle screws into the ring, through which both the cutting gas and the signal from the sensor on the head pass. According to the manufacturer, the ring combines imported ceramic with a special alloy that has the same thermal expansion, so it does not crack when it heats up.

Role: Electrical insulator between nozzle and head body
Selection: By cutting head model
Category: Wear part

Ceramic rings details All accessories

LHM Series — gantry machine for plate and heavy profiles

LHM

LT-12055TKA

Come and see ACME machines at work

We run 2 ACME machines in our Cluj-Napoca production facility every day. We know them first-hand.

Demo machines available

LHM — combined plate + profiles: plate up to 12,000×3,000 mm, profiles up to 1,200×600 mm
LT-12055TKA — 30 kW laser for tubes and profiles: Ø30–540 mm, tube length up to 12,500 mm, workpiece weight up to 2,100 kg

How the visit works

1 Book a date and time by phone or email
2 Watch the machine cut live
3 We discuss the result and the configuration that suits you

Book a visit +40 774 501 662

LHM Series at work in our Cluj-Napoca production facility

LHM Series details

LHM Series in our own production facility: an enclosed machine above a long bed of profiles, on the shop floor

LT-12055TKA at work in our Cluj-Napoca production facility

T Series details

T Series in our own production facility: the laser cuts a rectangular section, sending up sparks

Why ACME Laser Romania

Benefits of a local
authorised dealer

Technical support in Romanian

Talk to us in Romanian, by phone or email. For on-site visits, we have a local service team.

Spare parts in stock

We keep common spare parts and consumables in stock. Special parts are supplied to order.

Operator training

Training takes place at installation, directly on your machine, so the people who run it every day start out already confident with basic operation.

Transport and installation

Transport, customs clearance, insurance, acceptance inspection, installation and operator training are included. The machine is handed over on your shop floor, ready to run.

Advice before you order

We start from your process: materials, thicknesses, diameters, monthly volumes. On that basis we recommend the right machine — not the most expensive one in the catalogue.

24-month warranty

24-month manufacturer's warranty on all ACME machines.

FAQ

Answers to the questions we are asked most often

Who is ACME Laser Romania?

ACME Laser Romania is the authorised ACME dealer for Romania, based in Cluj-Napoca: we sell, install and service laser machines for cutting tube, profiles and sheet. Two of them, an LT-12055TKA and an LHM, work every day in our own production facility. Transport, customs clearance, insurance, acceptance inspection, installation and operator training are included, and the machines carry a 24-month warranty.

Which ACME machines do you offer in Romania?

The range for Romania has 6 segments: small tube cutting (D Series for tube, A Series, E Series, TF Series); large tube & profile cutting (T Series, G Series, TN Series); sheet cutting (S Series, D Series for sheet, LP Series); combined — sheet + tube/profiles (ST Series, DT Series, LHM Series); 4-in-1 laser welding (FLW-T Series); accessories (BOCI, laser sources, lenses, nozzles, ceramic rings). On the products page they are grouped in exactly the same way.

Can an ACME laser replace plasma on thick plate?

Yes. On thick plate, the LP Series takes the place of plasma and oxy-fuel cutting machines: it cuts up to 100 mm, with cutting areas from 12 m to 24 m long. The difference shows in the cut edge. After laser cutting, the part goes to the next operation straight off the machine; after plasma or oxy-fuel, it usually needs further processing.

How long does delivery of an ACME machine take?

The delivery time for an ACME machine depends on the model and configuration chosen, so we confirm it in the written quotation once we have discussed your application. You will receive our recommended configuration and the written quotation within 1–2 working days. Transport, customs clearance, insurance, acceptance inspection, installation and operator training are included, and the machine is handed over on your shop floor, ready to run.

What warranty do ACME machines come with?

ACME machines come with a 24-month manufacturer's warranty on all models. Consumables are not covered by the warranty, and the exact terms for the chosen model are set out in the written quotation. During and after the warranty period, service is provided by our local team, with common parts and consumables in stock and technical support in Romanian.

ACME Laser Romania is a new dealer. What experience do you have with ACME machines?

We are new as an ACME dealer, but not new to industry: we use 2 ACME machines in our own production facility in Cluj-Napoca, an LHM and an LT-12055TKA, and we know first-hand the whole life of a machine, from transport and installation to daily operation and maintenance. The manufacturer has more than 3,000 machines installed in more than 60 countries and regions. Both of our machines can be seen at work during a demo on a real machine in our own production facility.

Tell us what you need to cut.
We recommend the right machine.

Tell us about your application — material types, thicknesses, typical diameters, monthly volume. We will reply with a recommended configuration and a written quote.

Request a quote Call us: +40 774 501 662

Free consultation · Authorised ACME dealer · Installation and service in Romania