T Series — Laser cutter for large tubes and heavy profiles

The T Series cuts tubes and profiles from Ø30 to Ø840 mm, depending on the model: Ø30–350 mm on the 12036TKA, Ø30–540 mm on the 12055TKA, Ø120–640 mm on the 12065TKA and Ø200–840 mm on the 12085TKA. Small diameters, from Ø30 mm, go on the first two models, while the 12085TKA starts at Ø200 mm, for the largest sections. On all four models, the maximum tube length is 12,500 mm.

On the T Series, the cutting head cuts the edge of the part at an angle, up to 45° in either direction, in the same pass as the cut itself. The weld prep comes straight off the machine, with no separate milling or grinding and no second clamping. Bevels are cut on tubes and profiles as weld preparation; angle sections are not bevelled.

It means the T Series also cuts the last part from the tube, with no end piece left to scrap. The minimum remnant is 0 mm on all four models: the 3 chucks hold the material right to the end, and the middle chuck controls the short end. More parts come out of the same tube, whereas standard machines leave an end piece that can no longer be used.

The T Series works with laser sources of up to 40 kW. On the 12036TKA, the smallest model, the range is 1–40 kW, and on the 12055TKA, 12065TKA and 12085TKA it is 6–40 kW. The exact power is set in the configuration we recommend in your quotation, according to the material being cut, the wall thickness and your production volume.

The T Series cuts I-beams and H-beams, channels, angles and special shapes, as well as round, square and rectangular tube. The profile goes in whole and comes out cut to length, with all its holes, without passing through the saw or the drilling machine. The integrated loader also takes special profiles. The machine is designed for heavy structural steelwork, industrial buildings, shipyards and industrial machinery.

The difference is part size: both series have 3 chucks and a minimum remnant of 0 mm. The T Series cuts Ø30–840 mm, in lengths up to 12.5 m, with up to 40 kW of power and parts up to 3 t, with a focus on heavy structural profiles. The G Series covers Ø10–350 mm, with 1–30 kW and parts up to 1,850 kg. When parts go beyond Ø350 mm or 1,850 kg, they are cut on the T Series.

T Series dimensions vary from model to model: the 12036TKA measures 29,100×4,000×3,400 mm (length × width × height), the 12055TKA 30,500×4,050×3,750 mm, the 12065TKA 30,500×5,000×3,400 mm and the 12085TKA 31,500×5,500×4,000 mm. The maximum workpiece weight increases with the model: 1,400 kg, 2,100 kg, 2,600 kg and 3,000 kg respectively.